Our new Twist-In RO System with Drinking Water Kit includes everything you need to provide the best quality drinking water for your family! The Aquatic Life Twist-In 100 GPD 3-Stage Reverse Osmosis (RO) filtration system is a very compact water purification solution that efficiently combines reverse osmosis RO technology with our quick and easy to change twist-in replacement filter cartridges. The new twist-in media cartridge design makes filter changes simple, easy and clean – no tools required and no mess! The twist-in cartridges can be easily changed in only seconds with just a quarter turn and without contact with used filter material, and the supply water to the unit does not have to be turned off to replace any cartridge.The Aquatic Life add-on drinking water kit includes everything needed to convert your current RO or RO/DI unit to a drinking water system. Easy installation with our RO Buddie and Twist-In reverse osmosis systems - units sold separately. The pressurized tank and faucet are included, along with the parts needed to bypass the DI (deionization) stage of your RO/DI system. The pressurized tank ensures that 2.8 gallons of water will be available on demand for drinking water. RO/DI unit sold separately. Reverse Osmosis (RO) water is a process of removing contaminants from tap water using a special semipermeable membrane. The process works quite slowly, so it is often desired to collect the water in a storage tank so that the water is available on demand when needed. This kit includes everything needed to add drinking water to most existing RO and RO/DI filtration units. This add-on faucet kit is necessary to set up your reverse osmosis unit to supply drinking water on demand. Kit includes: (1) 2.8 gallon pressurized tank, (1) chrome faucet, (1) inline check valve, (1) pressure sensitive solenoid, (1) pressure tank valve, (1) polishing carbon cartridge, (2) carbon cartridge clips, (1) drain saddle, (1) under sink water line Adapter valve (1/2” female x 1/2” male press-fit), (1) 1/4” Manual on/off valve, (2) 1/4” mpt x 1/4” press-fit adapters, (2) 1/4” press-fit tees, (1) Yellow tubing 1/4” x 4 ft, (1) Blue tubing 1/4” x 4 ft, (1) roll Teflon tape, (1) set mounting screws, (1) installation, operation and maintenance guide. Item 540504.
Download the 3-Stage 100 GPD Twist-In RO User Manual HERE
Download the Drinking Water Add-On Kit Manual HERE