YOUR Water MADE Better – Increase the effectiveness of your RO system, and REDUCE waste water by up to 65%!

The smart way to REDUCE WASTE WATER, DECREASE DI RESIN CONSUMPTION and EXTEND MEMBRANE LIFE.

Simply plumb the Smart Buddie into any 1/4″ RO or RO/DI System to instantly save money and water. How Smart is That! Reverse Osmosis Booster Pumps are used to increase the pressure going into your RO or RO/DI system which make it operate more efficiently and can decrease consumption of DI resin. The increased pressure will also improve the economy of the unit (it will run less reject water) as well as the quality of the water. Designed as an accessory for Reverse Osmosis units in areas with low water pressure, or for users that want maximum output, the best quality filtered water, and maximum reduction of waste water from their RO systems. The Smart Buddie booster pump is quiet, easy to install, and can significantly increase water output. Reverse osmosis is a pressure-driven process. Small residential RO units will theoretically operate on very low pressure–down to 35 psi–but the reality is you won’t get a lot of water and the product water quality may be compromised if the unit runs below 45 psi. RO units typically run well on municipal water pressure of 60 psi, but they run even better with a small pump to boost the pressure to 80 psi or higher!

Watch the video here > Smart Buddie Booster Pump Video